You are here

Hobby Lobby "ARCADE" Sign Lighting Kit

SKU: ArcadeLED

This kit adds dynamic lighting to the ARCADE Arrow signs sold at Hobby Lobby to mimic the appearance of a midway marquee sign.

It consists of a master controller board with 7 LEDs and 6 slave display boards, each with 7 LEDs. The lighting sequence uses 3 levels of brightness to simulate the gradual turn-on / turn-off of incandescents. A pot on the master display board controls the sequence speed, and the controller can be configured with either a 14-state "chase" sequence or a 28-stage "fill and empty" sequence. The kit is powered via 5V from a micro-USB connector and takes ~150-200mA (average).

You will need to drill out 49 1/4" holes in the center of each spot on your sign to fit the kit (use of a drill press and starting with small pilot holes is suggested). The kit boards should be affixed the the sign with double-sided tape under the connectors to prevent shorting.

Price is for the lighting kit only -- the sign itself and hte micro-USB cable are not included. Please specify warm-white (slightly yellow) or cold-white (slightly blue) preferred sequence type (if you care). Only 9 kits will be sold, and all will be configured differently.

Video links:

List price: $150.00
Price: $150.00
Weight: 1 lb
Dimensions: 9 in × 6 in × 2 in